logo

Scabbard Shopping Cart
Home Benefits History How It Works Testimonials Industry Links Gallery Contacts

Search:
Shopping Cart
$53.99
(CLICK IMAGE FOR EXAMPLE) Designed to attach to the front and/or back rack of ATVs . Scabbard sold separately.
$59.99
(CLICK IMAGE FOR EXAMPLE) For mounting to flat surfaces and holding two Safety Scabbard at a 10 degree forward tilt. Example: Floor boards, cargo beds. Scabbard sold separately.
$34.99
(CLICK IMAGE FOR EXAMPLE) This bracket is designed to mount the Safety Scabbard using the existing two bolts that attach the front roof supports to the side of most golf carts. The brackets are drilled to match these existing bolts that are 6” on centers. Scabbard sold separately. --Instructions: 1) Remove roof support bolts from one side of cart 2) Install bracket flange down (if installed flange up Safety Scabbard hits bolts) 3) Replace bolts and tighten 4) Install Safety Scabbard
$34.99
(CLICK IMAGE FOR EXAMPLE) This bracket is designed to mount the Safety Scabbard using the existing two bolts that attach the front roof supports to the side of most golf carts. The brackets are drilled to match these existing bolts that are 6” on centers. Scabbard sold separately. --Instructions: 1)Remove roof support bolts from one side of cart 2)Install bracket flange down (if installed flange up Safety Scabbard hits bolts) 3)Replace bolts and tighten 4)Install Safety Scabbard
$39.99
(CLICK IMAGE FOR EXAMPLE) This bracket accommodates two Safety Scabbards and is designed to utilize the Lock n Ride pockets in the bed of Polaris UTVs. They require Lock n Ride expansion anchor (available from your Polaris Dealer). Two are required to replace both sides. Scabbard sold separately. --Instructions: 1) Remove the bolt holding the clamping handle from the top of the expansion anchor 2) Remove the handle and nylon washer 3) Install the large flat washer supplied with the mounting bracket on top of the expansion anchor (this is required to keep the anchor from pulling through the bracket) 4) Replace the nylon washer and handle 5) Place the bracket over desired pocket in UTV bed 6) Install the expansion anchor 7) Check the holding tension of the anchor (adjust accordingly by turning the adjusting nut on the bottem of the anchor) 8) Attach Safety Scabbards
$27.59
(CLICK IMAGE FOR EXAMPLE) This bracket is designed to replace the gun holders of the Rugged Gear style floor mount system with Safety Scabbards. Two are required to replace both sides. Scabbard sold separately. --Instructions: 1) Remove the existing gun holders from the 1” x 2” post. 2) Use the existing bolts and plastic spacers that held the gun holders to attach the adapter angle. 3) Repeat on other side. 4) Attach Safety Scabbards
$33.99
(CLICK IMAGE FOR EXAMPLE) Fits 1.375 inch diameter shapes Example: Safety cages and roll bars. Scabbard pictured sold separately.
$34.99
(CLICK IMAGE FOR EXAMPLE) Fits 1.50 inch diameter shapes Example: Safety cages and roll bars. Scabbard pictured sold separately.
$46.99
(CLICK IMAGE FOR EXAMPLE) Fits 1.75 inch diameter shapes Example: Safety cages and roll bars. Scabbard sold separately.
$46.99
(CLICK IMAGE FOR EXAMPLE) Fits 1.90 inch diameter shapes Example: Safety cages and roll bars. Scabbard sold separately.
$19.99
(CLICK IMAGE FOR EXAMPLE) Fits 3/4 inch and 1 inch vertical shapes Example: Golf cart roof supports. Scabbard sold separately.
$50.69
(CLICK IMAGE FOR EXAMPLE) This bracket is designed to mount the Safety Scabbard perpendicular or parallel to a 1-½” to 1-7/8” round structural member (ie: roll bar, ect.). It provides one inch clearance between the structural member and the edge of the Safety Scabbard. --Instructions: 1) Attach metal brackets to Safety Scabbard 2) Wrap supplied plastic strip around structural member 3) Place u-bolt and cradle around structural member 4) Place metal bracket on u-bolt 5) Install flat washers, lock washers, nuts 6) Snug nuts 7) Check alignment and position of Safety Scabbard 8) Tighten nuts --Known Applications: A) AR Safety Scabbard to horizontal structural members on back of Polaris Razor cage B) All Safety Scabbards to vertical structural members
$42.99
(CLICK IMAGE FOR EXAMPLE) This bracket is designed to mount the Safety Scabbard parallel to a 1-½” to 1-7/8” round structural member (ie: roll bar, ect.). It provides one inch clearance between the structural member and the edge of the Safety Scabbard. --Instructions: 1) Attach metal brackets to Safety Scabbard 2) Wrap supplied plastic strip around structural member 3) Place u-bolt and cradle around structural member 4) Place metal bracket on u-bolt. 5) Install flat washers, lock washers, nuts 6) Snug nuts 7) Check alignment and position of Safety Scabbard 8) Tighten nuts --Known Applications: All Safety Scabbards to vertical structural members.
$73.99
(CLICK IMAGE FOR EXAMPLE) Replacement liner BLACK
$86.99
(CLICK IMAGE FOR EXAMPLE) Replacement camo liner (Realtree Hardwood)
$108.99
(CLICK IMAGE FOR EXAMPLE) Pink replacement liner for Safety Scabbard
$27.99
(CLICK IMAGE FOR EXAMPLE) Protects gun from rain, dust and harmful UV rays.
$39.99
(CLICK IMAGE FOR EXAMPLE) Protects gun from rain, dust and harmful UV rays.
$39.99
(CLICK IMAGE FOR EXAMPLE) Protects gun from rain, dust and harmful UV rays.
$139.99
(CLICK IMAGE FOR EXAMPLE) Safety Scabbard, The leading gun containment system on the hunting market today.
$165.99
(CLICK IMAGE FOR EXAMPLE)Safety Scabbard designed specifically for the AR15 and M16 style weapons.
$153.99
(CLICK IMAGE FOR EXAMPLE) Safety Scabbard. The leading gun containment system on the hunting market today.
$174.99
(CLICK IMAGE FOR EXAMPLE) Safety Scabbard, The leading gun containment system on the hunting market today.
©2000-2010, Scabbard.com or its affiliates
Shopping cart