POLARIS LOCK N RIDE BEDBRACKET
This bracket accommodates two Safety Scabbards and is designed to utilize the Lock n Ride pockets in the bed of Polaris UTVs. They require Lock n Ride expansion anchor (available from your Polaris Dealer). Two are required to replace both sides.
Scabbard sold separately.
--Instructions:
1) Remove the bolt holding the clamping handle from the top of the expansion anchor
2) Remove the handle and nylon washer
3) Install the large flat washer supplied with the mounting bracket on top of the expansion anchor (this is
required to keep the anchor from pulling through the bracket)
4) Replace the nylon washer and handle
5) Place the bracket over desired pocket in UTV bed
6) Install the expansion anchor
7) Check the holding tension of the anchor (adjust accordingly by turning the adjusting nut on the bottem
of the anchor)
8) Attach Safety Scabbards
Product number: 
